Windows Setup could not configure Windows to run on computers hardware

Some users when installing a Feature Update or total install/re-install of  Windows eleven or Windows 10 may receive the fault Windows setup could non configure Windows to run on this reckoner's hardware correct after or during the "Completing installation" stage of the procedure. The installation process will not continue past the error. If you restart the computer, the install process volition arrive back at the same error with no farther progress. In this post, we will provide the solution for both cases of when performing a feature update or installing Windows xi/10 and yous encounter this error.

This fault is triggered due to a number of reasons such as corrupted update'southward installation files (especially during a major update such as the Windows 11/ten Feature Updates), an unseen problem with the Windows Update services, Windows activation error (if you're installing Windows eleven/10), Os organisation file mistake, or even conflicts between existing software.

Windows Setup could not configure Windows to run on this computer'south hardware

If you were installing Windows 11/ten and the error occurred, you can try the following steps to resolve this issue:

1. Manually run msoobe.exe to finish the install
2. Modify some BIOS settings
3. Terminate overclocking your CPU
4. Check for and manually install problematic drivers

Let'south check out these steps in detail.

i] Manually run msoobe.exe to cease the install

A possible resolution to this issue is to manually run the msoobe.exe programme (which ensures the Microsoft Windows version is activated and registered properly) to allow the install to complete.

Here's how to manually run the msoobe.exe program:

• While on the screen where the mistake appears, press Shift+F10 to bring up the command prompt.
• Blazon or copy and paste the command below (supercede the x place-holder with the actual drive letter of the alphabet where Windows is installed and striking Enter.

CDten:\windows\system32\oobe

• Next, blazon the command beneath in succession and hit Enter.

msoobe

You may then be prompted to create an business relationship proper noun and password and ready the time and appointment.

• Click Finish when done

If this is a retail version of Windows 11/10, you may also exist prompted to enter a production key for Windows eleven/10. Enter the product fundamental and click Finish.

The installation procedure should then be consummate and permit the calculator to boot into Windows.

two] Modify some BIOS settings

There are certain settings in BIOS which piece of work swell for older versions of the Windows operating system but they display poor execution on Windows 11/10 and it can frequently cause this error to occur. In this case, do the following:

• Restart your computer and printing a specific fundamental to kick into BIOS.
• Locate the SATA option in BIOS. This item can exist located under different tabs depending on different manufacturers, and usually, they tin exist the Advanced tab, Integrated Peripherals, etc.
• When you locate it, change it to IDE, RAID, ATA or AHCI and save the alter. Annotation that even if it's not SATA that is originally there, you can still change it to something else.

Pro tip: ATA is the most reasonable pick for the process of installing new updates or upgrading.

Recall to change the settings back to their original state after you take finished with the process and installed Windows xi/10 successfully on your computer.

three] End overclocking your CPU

Overclocking is a process where you change the frequency and speed of your processor to a greater value and in a higher place the recommended manufactory settings. This can give your PC a pregnant speed reward.

In this case, returning your CPU'south rate and frequency to its original state depends on which software you used to overclock in the showtime identify.

4] Check for and manually install problematic drivers

You lot can check this by disconnecting or disabling diverse devices on your figurer via Device Manager. After which y'all can restart the installation process and bank check to see when the error does not appear. If so, that device is causing bug.

Pro tip: It has been known that the hard deejay drivers is usually the culprit here. So check that first.

You should run into the following message when yous choose the install option if you lot are really having problems with your drivers in the starting time place:

To continue installation, use the Load Commuter option to install 32-chip and signed 64-bit drivers. Installing an unsigned 64-bit device driver is non supported and might result in an unusable windows installation.

This unremarkably means that the driver for that specific device is not installing properly and you may need to load it manually. Here's how:

• Download the driver for the problematic device from the manufacturer's website.
• Save the driver to a USB flash drive or external hard drive.
• Connect the device to the estimator which you are installing Windows on.
• Start the system installation, lookout for Load Driver and click this pick.
• Once the driver is loaded, proceed with the installation of Windows.

The process should be completed successfully.

At present the solutions outlined above is for when you meet 'Windows Setup could not configure Windows to run on this computer's hardware' error during installation of Windows eleven/10. If however, you lot encounter this error during a feature update, yous tin try the following solution.

1. Restart your PC and re-run the Windows Update
2. Run Windows Update Troubleshooter
3. Run the SFC/DISM scan
4. Install the Windows Update via Windows x Update Assistant or Media Creation Tool

Permit'southward delve into these steps.

1] Restart your PC and re-run the Windows Update

It could be some of the installation files that were downloaded earlier were corrupted or missing. Before you lot re-run Windows Update, go to this folder C:\Windows\SoftwareDistribution and move all the files to another folder or yous tin simply delete the Software Distribution folder.

Mostly, after removing the files inC:\Windows\SoftwareDistribution, Windows volition re-download whatever it must when you run Windows Update again. Then, try this and if the event isn't resolved you can try the next solution.

2] Run Windows Update Troubleshooter

For any Windows 11/x related problem you encounter, the very first thing you should do is to run the in-built Windows xi/10 Troubleshooter for that particular expanse the problem occurred. In this example, you should endeavor to run the Windows Update troubleshooter and see if the issue is resolved.

3] Run the SFC/DISM browse

The SFC & DISM are tools to automatically browse and repair missing files or corrupted system files in the Windows 11/10 OS – and in some cases rebuild the system image. The procedure does not bear on your personal files.

For the purposes of ease and convenience, yous can run the scan using the procedure below.

Open Notepad – re-create and paste the command below into the text editor.

@repeat off appointment /t & time /t repeat Dism /Online /Cleanup-Image /StartComponentCleanup Dism /Online /Cleanup-Image /StartComponentCleanup echo ... date /t & time /t echo Dism /Online /Cleanup-Image /RestoreHealth Dism /Online /Cleanup-Paradigm /RestoreHealth echo ... engagement /t & time /t repeat SFC /scannow SFC /scannow date /t & fourth dimension /t pause

Relieve the file with a name and append the .bat file extension – eg; SFC-DISM-browse.bat.

Repeatedly run the batch file with admin privilege (right-click the saved file and select Run every bit Administrator from the context menu) until it reports no errors – at which point yous tin at present restart your PC and meet if the 'Windows Setup could not configure Windows to run on this computer's hardware' issue has been resolved when you lot attempt updating Windows 11/x.

4] Install the Windows Update via Windows ten Update Assistant or Media Creation Tool

Windows Update can be installed via several other methods such every bit using the Update Assistant or Media Cosmos Tool. For major updates like the Windows 11/ten Characteristic Update, y'all can manually update to information technology using the two mentioned tools.

How do y'all set up Windows setup could not configure Windows to run on this calculator's hardware?

To fix Windows setup could non configure Windows to run on this estimator's hardware error; yous need to cheque when you lot are getting this issue. If you get this error while installing Windows 11/x, y'all need to run msoobe.exe to finish the installation manually. Autonomously from that, you can alter the BIOS settings, cease overclocking your CPU, etc. Nonetheless, if you go this fault during a feature update, you need to restart the Windows Update process, run the Windows Update Troubleshooter, etc.

Why could Windows not consummate the installation?

It entirely depends on which error you are getting. Different errors crave dissimilar solutions, and you need to follow them one after one to get rid of this problem. Even so, yous can try restarting the Windows Update service from the Services console, use the Windows Update Troubleshooter, clear the Software Distribution binder, check your net connectedness, etc.

Related read: Windows could non update the computer's boot configuration. Installation cannot proceed.

Depending on how you encountered the 'Windows Setup could not configure Windows to run on this computer's hardware' error, any of the above solution(s) should fix the outcome.

Source: https://www.thewindowsclub.com/setup-could-not-configure-windows-to-run-on-this-computers-hardware

Posted by: bertrandromed1939.blogspot.com

Share this post